Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
New development
The interbody cage is used to replace the intervertebral space after disc removal. The cage is placed between the vertebral bodies, which fills the height of the disc lumen and expands the space through which the nerve endings exit. This eliminates their tightness and pain.
Indications for cage implantation are stabilization of the lumbar spine after removal of the intervertebral disc, spinal deformities, injuries, destructive changes, as well as degenerative processes.
The implant is made in the form of a support with a special sliding mechanism that allows you to intraoperatively adjust the height of the cage from 8 mm to 11 mm.
The surfaces in contact with the vertebrae have a sufficient area and are made with a notch, which increases the stability of the position and reduces the possibility of migration.
The rounded contours of the cage facilitate its introduction into the intervertebral space.
The cage is made of titanium alloy, which provides bioinertness of the structure.
The effectiveness of the cage for spondylodesis is proven by the fact that this implant provides a low risk of complications, leads to less severe pain, stabilization of the spine, reduces the duration of the rehabilitation period due to less tissue trauma during surgery.


MAECENAS IACULIS
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Patch НФ-6
№ s/n | Designation | S, mm | R, mm | h, mm | D, mm | d, mm | |
1 | 4-ИЭ10716 | НФ-6 | 6,2 | 3,1 | 9 | 18 | М6х0,75-7Н |
2 | 4-ИЭ10716-01 | НФ-6/1 | 6,2 | 3,1 | 9 | 18 | М6-7Н |
3 | 4-ИЭ10716-02 | НФ-7 | 7,2 | 3,6 | 9 | 18 | М6-7Н |
4 | 4-ИЭ10717 | НФ-5 | 5,2 | 2,6 | 8 | 16 | М5-7Н |
5 | 4-ИЭ10717-01 | НФ-4 | 4,2 | 2,1 | 7 | 14 | М4-7Н |
Screw polyaxial with a groove under rod with Internal screw to lock in floating position
№ s/n | Designation | S, mm | D, mm | L, mm |
1 | ФП 100.445.030 | 5 | 4,5 | 30 |
2 | ФП 100.445.035 | 35 | ||
3 | ФП 100.455.030 | 5,5 | 30 | |
4 | ФП 100.455.035 | 35 | ||
5 | ФП 100.455.040 | 40 | ||
6 | ФП 100.465.030 | 6,5 | 30 | |
7 | ФП 100.465.035 | 35 | ||
8 | ФП 100.465.040 | 40 | ||
9 | ФП 100.465.045 | 45 | ||
10 | ФП 100.465.050 | 50 | ||
11 | ФП 100.465.055 | 55 | ||
12 | ФП 100.465.080 | 80 | ||
13 | ФП 101.545.030 | 6 | 4,5 | 30 |
14 | ФП 101.545.035 | 35 | ||
15 | ФП 101.555.030 | 5,5 | 30 | |
16 | ФП 101.555.035 | 35 | ||
17 | ФП 101.555.040 | 40 | ||
18 | ФП 101.565.030 | 6,5 | 30 | |
19 | ФП 101.565.035 | 35 | ||
20 | ФП 101.565.040 | 40 | ||
21 | ФП 101.565.045 | 45 | ||
22 | ФП 101.565.050 | 50 | ||
23 | ФП 101.565.055 | 55 | ||
24 | ФП 101.565.080 | 80 |
Bracing КВУ II
№ s/n | Designation | L, mm | n, pcs. | d, mm | h, mm | D, mm | D1, mm | |
1 | 3-ИЭ10871 | КВУII-6/1 | 17 | 1 | 7 | 7 | 12 | M6-7Н |
2 | 3-ИЭ10871-01 | КВУII-6/2 | 27 | 2 | ||||
3 | 3-ИЭ10871-02 | КВУII-6/3 | 37 | 3 | ||||
4 | 3-ИЭ10871-03 | КВУII-6/4 | 47 | 4 |
Plate mesh 100×100 mm, thickness of 0,6 mm
№ s/n | Designation | R, mm |
1 | ФПК-300.000.100 | 100 |
2 | ФПК-300.000.130 | 130 |
3 | ФПК-300.000.170 | 170 |
Rod screwed СР
№ s/n | Designation | d, mm | L, mm | l, mm | |
1 | 3-ИЭ10830 | СP-4/70 | M4-6g | 70 ± 1 | 20 ± 0,5 |
2 | 3-ИЭ10830-01 | СP-4/80 | M4-6g | 80 ± 1 | 20 ± 0,5 |
3 | 3-ИЭ10751 | СP-5/70 | M5-6g | 70 ± 1 | 20 ± 0,5 |
4 | 3-ИЭ10751-01 | СP-5/80 | M5-6g | 80 ± 1 | 30 ± 0,5 |
5 | 3-ИЭ10751-02 | СP-5/90 | M5-6g | 90 ± 1 | 30 ± 0,5 |
6 | 3-ИЭ10750 | СP-6/100 | M6-6g | 100 ± 1 | 30 ± 0,5 |
7 | 3-ИЭ10750-01 | СP-6/120 | M6-6g | 120 ± 1 | 40 ± 0,5 |
8 | 3-ИЭ10750-02 | СP-6/140 | M6-6g | 140 ± 1 | 45 ± 0,5 |
9 | 3-ИЭ10840 | СP-6/160 | M6-6g | 160 ± 1 | 55 ± 0,5 |
Rod plain СГ
№ s/n | Designation | d, mm | L, mm | l, mm | |
1 | 4-ИЭ10950 | СГ-5/100 | 5 | 100 ± 2 | 30 ± 0,5 |
2 | 4-ИЭ10950-01 | СГ-5/120 | 5 | 120 ± 2 | 30 ± 0,5 |
3 | 4-ИЭ10950-02 | СГ-5/140 | 5 | 140 ± 2 | 40 ± 0,5 |
4 | 4-ИЭ10950-03 | СГ-5/160 | 5 | 160 ± 2 | 50 ± 0,5 |
5 | 4-ИЭ10950-04 | СГ-5/180 | 5 | 180 ± 2 | 50 ± 0,5 |
6 | 4-ИЭ10950-05 | СГ-5/200 | 5 | 200 ± 2 | 50 ± 0,5 |
7 | 4-ИЭ10951 | СГ-6/100 | 6 | 100 ± 2 | 30 ± 0,5 |
8 | 4-ИЭ10951-01 | СГ-6/120 | 6 | 120 ± 2 | 40 ± 0,5 |
9 | 4-ИЭ10951-02 | СГ-6/140 | 6 | 140 ± 2 | 55 ± 0,5 |
10 | 4-ИЭ10951-03 | СГ-6/160 | 6 | 160 ± 2 | 55 ± 0,5 |
Reviews
There are no reviews yet.